除塵骨架是80年代初發展起來并得到廣泛應用的除塵器配件，它能夠_除塵設備清灰效應高，較低的阻力與相當高的凈化效率。它在除塵設備上的作用是將壓縮空氣在極短暫的時間內高速噴向除塵濾袋，同時誘導數倍于噴射氣量的空氣形成空氣波，使濾袋由袋口至底部產生急劇的膨脹和沖擊振動，在短促的時間內形成濾袋往復地"鼓、癟、鼓"的波浪形變形，使粉塵層發生變形、斷裂，以塊團狀脫離濾布并受重力作用下落。
　　The dust skeleton is developed in early 80's and dust collector accessories widely used, it can guarantee the dust removal equipment cleaning effect, low resistance and high purification efficiency. Its role in the dust removal device is compressed air in a short period of high-speed jet into the dust bag, also induced several times in the injection volume of air to form air wave, so that the bag expansion shock and vibration generated by the mouth of rapidly to the bottom, the wave shape in a short time to form filter bags into the drum, to "flat, drum" deformation, so that the dust layer deformation, fracture, to block the dough from the cloth and the gravity.
　　內角星骨架與彈簧骨架在除塵領域是比較長見的兩種配件，下面我們對二者進行一下深入了解。內星角骨架：是濾袋的肋骨，它應輕巧，便于安裝和維護，骨架的質量直接影響濾袋的過濾狀態和使用壽命。我公司引進_的骨架制造設備，制造的每一只骨架都能符合輕巧、光滑、挺直的要求，年產能力200萬只。它的規格為圓型、橢圓形、扁形、信封形、其它根據客戶要求定制的各種骨架。原料：_低碳鋼絲、鍍鋅鋼絲、不銹鋼線材等。
　　In the star skeleton and the spring framework are two common parts in the field of dust removal, below we two pairs of a deep understanding of. In the star angle skeleton: bags ribs, it should be lightweight, easy to install and maintain, skeleton directly affect the quality and service life of filter bag. Our company introduced advanced frame manufacturing equipment, each frame manufacturing could meet the lightweight, smooth, straight, with an annual output capacity of 2000000. The specification for circular, oval shaped, flat, envelope, other according to the customer request custom skeleton. Raw materials: high quality low carbon steel wire, galvanized wire, stainless steel wire, etc..
　　它的結構有多節式、文氏管、保護短管、下卸式、插接式、卡盤式等合理的結構方式。表面處理有鍍鋅、噴塑、防腐處理、表面有機硅噴涂等。而彈簧骨架是外濾式除塵設備_的除塵設備配件，彈簧骨架分有文氏管和無文氏管兩種，拉伸長度一般為1.5M，2M，2.5M 我廠生產的彈簧骨架是采用直徑為4毫米的鋼絲盤繞而成，一般骨架直徑為小于120毫米，伸張后為25圈/米，表面鍍鋅處理。
　　Its structure has a plurality of type, venturi tube, protective tube, unloading structure type, plug-in, chuck type reasonable. Surface treatment has galvanized, spray, anti-corrosion treatment, the surface of silicone spray. The spring framework is outside the filter type dust collecting equipment for dust removal equipment accessories, spring framework consists of Venturi tube and no venturi tube two, tensile length is 1.5M, 2M, 2.5M spring skeleton produced by our factory is with a diameter of 4 mm and a wire coil, general framework with diameter less than 120 mm, stretching after 25 laps / m, galvanized surface treatment.